Fabricated
stainless steel body ideally suited for dense or abrasive
media, both
wet and dry.
Stainless steel gate, seat and raised faces.
Heavy duty designed
body to resist deflection from line loads and
internal pressure.
Gate designed
to withstand full 150 PSI rated pressure as required
by MSS SP-81.
Body cavity,
seat configuration and beveled gate designed to provide
shut-off
capability in thick media such as pulp stock
slurries, or with
solid media such
as pellets or powders.
Valve seat face is protected by gate in both open and closed positions.
Full range
of operators available including air cylinder, bevel gear
and electric
motor operators.
Enclosed brass
stem bushing provides reduced operating torque and
protection
of stem bushing from harsh environments.
Can be manufactured in special materials such as ALLOY 20, HASTELLOY, TITANIUM and MONEL for severe services.
O-ring resilient
seat available.
Precision machined stainless steel gate for corrosion resistance, durability
and superior seating capability.
Stainless steel stem for corrosion resistance.
Gate wipers available
in packing to provide gate support, stabilize packing seal and minimize
packing damage from materials that may
stick to the gate.
Designed and tested to MSS SP-81 dimensions and specifications.
Hard faced seats
and hardened gates available to prevent galling or
wear in abrassive applications.
